Tiedown Hooks - Mazda 5 2007 Manual

Hide thumbs Also See for 5 2007:
Table of Contents

Advertisement

If towing service is not available in an
emergency, the vehicle may be towed
with all four wheels on the ground using
the towing hook at the front of the
vehicle.
Only tow the vehicle on paved surfaces
for short distances at low speeds.
CAUTION
Follow these instructions when towing
the vehicle with all wheels on the
ground.
1. Shift to neutral (MT), or the N
position (AT).
2. Turn the ignition switch to the ACC
position to prevent the steering from
locking up.
3. Release the parking brake.
Remember that power assist for the
brakes and steering will not be available
when the engine is not running.
Emergency Towing

Tiedown Hooks

CAUTION
Don't use the tiedown hooks under the
front and rear for towing.
They are designed ONLY for tying
down the vehicle when it's being
transported. Using them for towing will
damage the bumper.
qTiedown Hook-Front
1. Remove the tiedown eyelet, lug
wrench, and jack lever from the trunk
(page 7-3).
2. Wrap the jack lever with a soft cloth to
prevent damage to the bumper and
open the cap located on the front
bumper.
CAUTION
The cap cannot be completely removed.
Do not use excessive force as it may
damage the cap or scratch the painted
bumper surface.
In Case of an Emergency
7-21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents