HP EliteDesk 705 G2 Small Form Factor Maintenance And Service Manual page 74

3. A choice of four headings appears in the Computer Setup Utilities menu: Main, Security, Advanced, and
UEFI Drivers.
NOTE:
application. You can access this application directly by pressing
4. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys
to select the option you want, then press Enter. To return to the Computer Setup Utilities menu, press
Esc.
5. To apply and save changes, select Main > Save Changes and Exit.
● If you have made changes that you do not want applied, select Ignore Changes and Exit.
To reset to factory settings or previously saved default settings (some models), select Apply
●
Factory Defaults and Exit. This option will restore the original factory system defaults.
NOTE:
CAUTION:
because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup
screen.
64 Chapter 5 Computer Setup (F10) Utility
Selecting UEFI Drivers restarts the computer into the 3rd party option ROM management
Not all settings shown in the following sections are available for all models
Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes
F3 during startup.