Rider Model Identification - MTD OEM-190-032 Operator's Manual

Model Plate
Figure 1-1
Sample Model Number
7 9 0
1 3 A M G 0 0 0
Indicates Model Series 700
Figure 1-2
To The Owner
Assistance may be needed to complete the installation of
this attachment.
Determine The Model
of Your Rider
This manual is designed for installation of your new snow
thrower attachment on several different tractors. It is
important for you to determine which model of tractor that
you have.
To determine the model of tractor, locate the model plate
found underneath the seat. The model plate consists
of an 11 digit/letter model number and a serial number.
For ease in this installation and for future use, copy your
tractor's model number & serial number below now:
Rider Model Number:__ __ __ __ __ __ __ __ __ __ __
Rider Serial Number:_________________________
The 5 , 6 & 7 numbers from the left in your model
th th th
number determine your rider's model series. See Fig. 1-2.
When you fill in your model number in the space above,
the actual model series number should fall into the gray
shaded area.
If you have a 700 model series rider, you will need to
acquire the service kit number 753-05097A to complete
this installation. Call a customer support representative
as instructed on Page 2 of this manual. For other models
follow the instructions in this manual.
3
1
Rider Model
Identification
NOTE:
References to LEFT
and RIGHT indicate the
left and right sides of
the tractor when facing
forward in the operator's
position. Reference to
the FRONT indicates the
grille end; to the REAR,
the rear end of the rider.