3-Thread Serging - ELNA 664 Instruction Manual

3-Thread Serging

Using the needle on the right only
(for narrow hem 3)
When you use the right needle, the standard sewing
width is 3.5 mm.
The illustration on the left shows you how to thread
the needle.
Note:
Tighten the needle clamp screw on the side that is
not being used to prevent losing the screw.
Using the needle on the left only
(for 3-thread)
When you use the left needle, the standard sewing
width is 5.7 mm.
The illustration at left shows you how to thread the
needle.
66