Removing The Coin-Cell Battery; Replacing The Coin-Cell Battery - Dell Studio XPS 1640 Service Manual

Back to Contents Page
Coin-Cell Battery
Dell™ Studio XPS™ 1640 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not
covered by your warranty.
NOTICE: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Coin-Cell Battery
1. Follow the instructions in Before You
2. Remove the base cover (see
3. Disconnect the coin-cell battery cable from the system board connector.
4. Lift the coin-cell battery off the computer base.
1 coin-cell battery 2 coin-cell battery cable connector
Replacing the Coin-Cell Battery
1. Replace the coin-cell battery.
2. Connect the coin-cell battery cable to the system board connector.
3. Replace the base cover (see
4. Slide the battery into the battery bay until it clicks into place.
Back to Contents Page
Begin.
Removing the Base Cover).
Replacing the Base Cover).
Before Working Inside Your Computer) before working inside the