Honda TRX420FA1 Owner's Manual page 231

14 TRX420FA1 FA2-32HR3B000.book 223 ページ ２０１３年９月６日 金曜日 午後１時５７分
Emergency Wheel Removal/Installation
Refer to Safety Precautions on page 113.
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Loosen – but do not remove – the wheel nuts (1).
3. Raise the front (or rear) wheels off the ground and place a
support block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
• Avoid getting grease, oil, or dirt on the front brake disc or pad
surfaces when removing and installing each wheel. Any
contamination can cause poor brake performance or rapid pad
wear after reassembly.
If You Have a Flat Tyre
(2)
(1)
(2) wheel rim
Taking Care of the Unexpected
(1)
223