14 TRX420FA1 FA2-32HR3B000.book 107 ページ 2013年9月6日 金曜日 午後1時57分
Touching the brakes after long hours or heavy usage, can cause burn
injuries.
1. Look for level parking area. Make sure the ground surface is firm.
2. After bringing your ATV to a stop, hold the brakes while you shift
into neutral.
3. Set the parking brake.
4. Turn the ignition switch to OFF (w).
If it is necessary to start the engine when your ATV in gear and is
stopped on a grade, rock the vehicle back and forth to allow shifting
the transmission into neutral.
The brake lights are activated by applying the parking brake. When
using the parking brake, be sure to turn the ignition switch to OFF
(w) to avoid discharging the battery.
Parking
Basic Operation & Riding
107