Coffee Preparation; Assembling/Disassembling Of Rapid Cappuccino System (R.c.s.) - Nespresso Lattissima Touch Instruction Manual

COFFEE PREPARATION

EN
NOTE: during heat up, you can press any coffee buttons. The coffee will then flow automatically when the machine is ready.
1. Lift the lever completely and insert the
capsule.

ASSEMBLING/DISASSEMBLING OF RAPID CAPPUCCINO SYSTEM (R.C.S.)/

1. Remove the milk container lid and unplug
milk aspiration tube.
12
2. Close the lever and place a cup under the
coffee outlet.
2. Remove the milk froth regulator knob by
turning it until and pulling it up.
110 ml
40 ml
25 ml
3. Press the Ristretto (25 ml), the Espresso (40 ml) or the Lungo (110 ml)
button. Preparation will stop automatically. To stop the coffee flow or top
up your coffee, press again.
3. Remove Rapid Cappuccino System connector by
unlocking it from to and pulling it off.
4. Take the cup. Lift and close the lever
to eject the capsule into the used capsule
container.
4. Remove the milk spout by pulling it off.