Water Hardness Setting - Nespresso Lattissima Touch Instruction Manual

WATER HARDNESS SETTING

1 sec.
1. Place the water hardness 2. The number of red squares
indicates the water hardness
sticker under water for 1 second.
level.
Water hardness table
Level
0
Latte Macchiato
1
Cappuccino
2
Warm milk froth
Warm milk froth +
3
+
Latte Macchiato
Warm milk froth +
4
+
Cappuccino
0
1
2
3
4
3. Switch the machine ON.
NOTE: remove milk jug.
dH fH mg/L CaCo3
<3 <5 <50
>4 >7 >70
>7 >13 >130
>14 >25 >250
>21 >38 >380
3 sec.
Descaling
Clean
4. Press the Latte Macchiato and Warm milk froth
buttons simultaneously for 3 seconds to enter Menu
mode: descaling and clean alerts start blinking.
5. Touch in a single continuous movement the following buttons:
Latte Macchiato ->Cappuccino ->Milk froth. The current water hardness
setting is indicated by the corresponding buttons (steady light).
6. Now, within 15 sec, you can set the desired value by
pressing the corresponding button. They blink 3 times
rapidly to confirm new value.
NOTE: the Menu mode exits
automatically after 30 sec. if no actions
are performed. It can be exit manually by
pressing the Latte Macchiatto and Milk
froth buttons simultaneously for
3 seconds.
7. The menu exits automatically and machine
returns to ready mode.
EN
23