Sanyo VPC-S60 Service Manual page 19

2. AWB Adjustment
Camera
(color viewer)
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Dsc Calibration
AWB Result:
1:
AGC=194,363,535,706,872
4F_AGC=0,0,0
WB=459,521,516
CHECK=127,127,149
WB_FS=459, 522, 520
CHECK_FS=127,128,148
MS=1952,1971
0
IRIS=0
Fno_FOR_ISO=71
SS_FOR_ISO=10025
YLEVEL_FOR_ISO=9656
Adjustment value determination is effectuated using the "AGC",
"CHECK", "CHECK_FS" and "MS" values.
If AGC=a1, a2, a3, a4, a5, CHECK=wc0, wc1, wc2,
CHECK_FS=wfc0, wfc1, wfc2 and MS=ms1, ms2, the adjust-
ment values fulfill the conditions below, they are determined
as within specifications.
Pattern box
x
OK
Copy
Adjustment value determination
100<a1<300, 250<a2<500, 450<a3<650,
550<a4<850, 750<a5<1023
wc0=128 ± 2, wc1=128 ± 2, wc2=130 ± 40
wfc0=128 ± 2, wfc1=128 ± 2, wfc2=130 ± 40
1200<=ms1<=3500, 1200<=ms2<=3600
Adjustment values other than the above are irrelevant.
3. CCD White Point Defect Detect Adjustment
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select "CCD Defect" on the LCD "Test", and click the "Yes".
3. After the adjustment is completed, OK will display.
4. Click the OK.
4. CCD Black Point And White Point Defect Detect
Adjustment In Lighted
Camera
Preparation:
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
Adjusting method:
1. Set the camera 0 cm from the pattern box. (Do not enter
any light.)
2. Double-click on the DscCalDi.exe.
3. Select "CCD Black" on the LCD "Test", and click the "Yes".
4. After the adjustment is completed, the number of defect
will appear.
5. Click the OK.
– 19 –
Pattern box
(color viewer)
2
)