Sanyo VPC-S60 Service Manual page 18

3-6. The adjustment item which in necessary in part exchange
Lens
Adjustment
COMPL PWB CP-1
(636 095 5288)
COMPL PWB TB-1
(636 095 5295)
LENS ASSY
(645 086 2144)
: Be sure to carry out the necessary adjustments after replacing the unit.
: Adjustment is possible from the menu setting screen of the camera and by using the calibration software.
3-7. Adjust Specifications
1. Lens Adjustment
Camera
Preparation:
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
Adjustment method:
1. Set the camera 0 cm from the collimator. (Do not enter any
light.)
2. Set the camera so that it becomes center of the screen in
the collimator.
3. Double-click on the DscCalDi.exe.
4. Click the Focus, and click the Yes.
5. Lens adjustment value will appear on the screen.
6. Click the OK.
CCD White Point
AWB
Defect Detect
Adjustment
Adjustment
Collimator
CCD Black Point
And White Point
Factory
Defect Detect
Cord
Adjustment In
Setting
Lighted
DscCalDi
Focus Result
!
ZOOM_BACKRUSH: 7
AF_WIDE: -10
AF_MID1: -11
AF_MID2: -1
AF_MID3: 10
AF_MID4: 23
AF_TELE: 41
ZOOM_WIDE: 2006
ZOOM_MID1: 2160
ZOOM_MID2: 2315
ZOOM_MID3: 2469
ZOOM_MID4: 2624
ZOOM_TELE: 2766
Adjustment value determination is effectuated using the
"ZOOM_BACKRUSH", "AF_WIDE", "AF_MID1", "AF_MID2",
"AF_MID3", "AF_MID4" and "AF_TELE" values.
Adjustment value determination
ZOOM_BACKRUSH: zoom backrush adjustment value
(0 ~ +40)
AF_WIDE: focus adjustment vallue W (-100 ~ +112)
AF_MID1: focus adjustment vallue M1 (-45 ~ +112)
AF_MID2: focus adjustment vallue M2 (-45 ~ +112)
AF_MID3: focus adjustment vallue M3 (-45 ~ +112)
AF_MID4: focus adjustment vallue M4 (-45 ~ +112)
AF_TELE: focus adjustment vallue T (-26 ~ +112)
– 18 –
USB storage
Language
Reset
information
Setting
Setting
registration
x
OK