Data Accounts - SENDO S360 User Manual

>
Note: Voice mail is a network service. You
may have to subscribe to this service and
it may not be available when roaming.
Check with your network service provider
for details.
Security
Used to define your PIN security settings.
See the Security section below for details.
Factory settings
Select this option to reset the phone's
settings to their original values. Press g,
OK to confirm the reset.
>
Note: Not all settings can be restored to
their original values.
Security
The Security menu under
used to define your PIN settings. Your PIN
(Personal Identity Number) is a code that you
can use to protect your phone against
unwanted use. This is the number that the
phone may ask for at switch on. The options
are as follows (depending on what PIN
activation settings you have selected):
Activate PIN
Enter your PIN at switch on (if your SIM card
supports this).
Deactivate PIN
You do not have to enter your PIN at switch
on.
Change PIN
Select this to change your PIN code.
Change PIN2
Some network services require a separate
security code - the PIN2 code. Select this
option to change your PIN2 code.
To activate, deactivate or change the PIN
code, you need to enter the current PIN code.
To change the PIN2 code, you need to enter
the current PIN2 code. If you don't know your
PIN code or PIN2 code, contact your network
service provider.
If you enter the wrong PIN or PIN2 code three
times, the SIM card is locked and you may be
Advanced settings is
[[[
53
asked to enter a PUK (Personal Unlock Key)
code - these may be different for PIN and
PIN2. The PUK codes may be listed in the
information that you received with your SIM
card or they may only be available from your
network service provider.
>
Note: The number of incorrect entries
depends on your network service
provider.
>
Note: Sendo cannot provide your PIN or
PUK codes. Contact your network service
provider for information.

Data accounts

φ
g Menu Settings
Find it:
Data accounts
Select this option to define the accounts used
for MMS and WAP services. These settings
may have already been configured on your
phone by your network service provider. If
your phone is not configured already, the
fastest and easiest way to do this is to visit:
http://www.sendo.com/config
to automatically configure your settings. The
Sendo Easy Configurator sends an SMS
message to your phone containing the
settings you require. Alternatively, you can
ask your network service provider to send you
this information (if available).
Data accounts are grouped into profiles. A
profile is a collection of settings for network
access. Select an account from the list
displayed to change the current settings, or
select Add new to define a new account. The
settings are as follows:
Name
A name for the account.
Username
The username to log on to the external data
network.
]]]
13