SENDO S360 User Manual page 35

Table of Contents

Advertisement

removing or replacing any part of your
phone.
!
Warning:
When changing covers, you are
removing some of the phone's outer
protection. Therefore, take extra care with
your phone and avoid exposure to dirt,
dust, liquids (including condensation)
and static electricity. Replace all covers as
quickly as possible.
!
Warning:
Do not charge the battery with
either of the phone covers removed.
To change your battery cover
1
To remove the battery cover, press down
on the area at the top of the back cover,
slide the cover down and lift off.
2
To replace the battery cover, place the
cover onto the back of the phone and slide
the cover into place, making sure the tab
at the top of the cover clicks into place.
To change your front cover
1
Remove the battery cover as described
above.
2
Remove the battery - press down on the
tab at the centre of the bottom edge of the
battery and lift out.
3
Pull on the two tabs near the bottom of the
phone at the same time, and press down.
The bottom of the cover should now stand
clear of the phone slightly.
4
Gently but firmly pull the bottom of the
cover away from the phone, as illustrated
below.
[[[
]]]
31
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

P360

Table of Contents