Renault 2016 TALISMAN Handbook page 77

ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
On-board computer with distance before
next service message (cntd.)
Service Intervals
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed,
door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can
therefore decrease more quickly in some cases than the actual distance travelled.
Resetting: to reset the mileage before a service, press and hold button 2 for approximately 10 seconds until the display shows
the range permanently.
Note: If a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the
event of an oil change, both the distance before the next service and the next oil change should be reset.
(4/5)
c) Mileage before service or oil change.
Oil change in
30 000 Kms / 24 mo
Service due in
300 Kms / 24 days
Service required
Interpreting the display selected
Mileage before service
With the ignition on, the engine not running and the display
selected "Reichweite bis zur Wartung", press button OK for about
5 seconds to display the mileage before the next service, then
press button 2 to view the mileage before the next oil change
(distance or time remaining before the next service). When the
distance value approaches its limit, there are several possible
scenarios:
– distance/time remaining less than 900 miles (1,500 km) or
one month: the message "Service due in" is displayed, ac-
companied by the nearest term (distance or time);
– range equal to 0 km/miles or service date reached: the
message "Service required" is displayed accompanied by
©
warning light .
The vehicle requires an oil change as soon as possible.
1.71