Renault 2016 TALISMAN Handbook page 117

Table of Contents

Advertisement

STOP AND START FUNCTION
Preventing the engine from
standing by
In certain situations, such as negotiat-
ing a crossroads for instance, it is pos-
sible (with the system activated) to keep
the engine running so as to be ready to
move off quickly.
Automatic gearbox:
Keep the vehicle stationary without
pressing too hard on the brake pedal.
Manual gearbox:
Keep the clutch pedal pressed right
down.
(2/4)
Conditions for coming out of
engine standby
For automatic gearboxes:
– the brake pedal is released, position
D or M engaged or;
– the brake pedal is released, position
N engaged and the parking brake off
or;
– the brake pedal is pressed again,
with position P engaged or position
N engaged with the handbrake ap-
plied, or;
– position R is engaged or;
– the accelerator pedal is depressed
or;
– in manual mode, the gear lever is
moved towards + or -.
For manual gearboxes:
– the gearbox is in neutral and the
clutch pedal is slightly depressed, or
– the engine is in gear and the clutch
pedal is pressed right down.
Special note: depending on the vehi-
cle, if you switch off the ignition when
the engine is on standby, the warning
Ä
light
is displayed for a few sec-
onds on the instrument panel.
To fill up with fuel, the engine must
be stopped (and not on standby):
stop the engine (please see
«Starting, stopping the engine»).
2.9

Advertisement

Table of Contents
loading

Table of Contents