Table of Contents
Advertisement
Getting Started
4
Switching on the TV
KD-28DL11U
On/Off button
5
Automatically tuning the TV
The 'Picture Rotation' menu.
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
The 'Autotune' prompt.
Do you want to start
automatic tuning?
Yes
No
8
Getting Started
1.
Connect the TV plug to your mains socket (220 - 240V AV, 50Hz)
2.
Push in the On/Off button (labelled !) on the front of the TV.
z
If the red standby mode indicator on the front of the TV is lit, press the TV I/1
button on the remote control to switch on the set. Please be patient as the picture
may take a few moments to appear on the TV screen.
KD-32DC11U
On/Off button
1.
When you switch on the TV for the first time a language menu appear on
screen with the word 'English' highlighted. Press the V or v button to
highlight the language you require. Press the OK button to confirm. From
now on all menus will appear in your chosen language.
2.
The 'Picture Rotation' menu appears on the screen asking you to check
if the picture is slanted. (Sometimes the Earth's natural magnetism can
cause the screen to look slanted.)
a) If no correction is required, press the V or v button to highlight 'Not
necessary'. Press the OK button to continue.
b) If some correction is required, press the V or v button to highlight
OK
'Adjust now'. Press the OK button to continue. Press the V or v button
to correct the slant. Press the OK button to store.
3.
The autotune prompt appears. Press the OK button to select 'Yes'. The
autotune procedure begins.
4.
The digital autotune display appears on screen and the TV starts to
search for all the available digital channels. This may take some time,
please be patient and do not press any buttons on the TV or remote
control.
If no digital or analogue channels are found, a message appears asking
you to confirm that the aerial is connected correctly. Check all the aerial
connections and press the OK button to start the autotune procedure
again.
OK
When the digital autotune is complete, the analogue autotune starts to
search for all the available analogue channels.
Once all available digital and analogue channels have been stored, the
TV returns to normal operation, displaying the digital channel stored on
channel number 1. If no digital channels are found, the analogue channel
stored on channel 1 is displayed.
KD-28DX51U / KD-32DX51U
The TV has now tuned
in all the available channels
On/Off button
Hide quick links:
Advertisement
Table of Contents
