Chain Brake - Dolmar PS-35 C Repair Manual

03 CHAIN BRAKE

1 2
Removing the brake band
CAUTION: Wear protective gloves to
prevent cuts!
Remove the sprocket guard, bar, and chain.
Remove the clutch drum, see Chapter 02.
Push the hand guard forward to engage the
chain brake. This tensions the brake band
spring.
Unscrew screws 1 and remove the cover 2.
Repair Manual PS-35
1
3
Lift the brake band 3 upward and turn it out of
the disengagement mechanism 4.
4
5
Secure the chain saw from slipping (vise).
Using the disassembly hook (Chap. 00, Pos.
9), disengage the brake band spring 5.
9