Dolmar PS-35 C Repair Manual page 7

01 SPROCKET GUARD / CHAIN TENSIONING SYSTEM
Disassembly
Folding handle
5 6
Remove the sprocket guard, guide bar and chain.
Fold up folding handle 1.
8
Using a small screwdriver, carefully pry the plastic
TLC
ring 2 up out of the sprocket guard.
9
Pull folding handle 1 out of the sprocket guard.
Remove spring 3 and locknut 4.
Chain tensioner
Unscrew bolt 5 and remove chain guide plate 6.
14
Unscrew bolt 7.
Remove cover 8, locking bolt 10 and clamping nut 9.
Unscrew bolt 11 and remove it and washer 12.
4
7
Remove tensioning handle 13 and driver 14.
3
Note: Do not misplace spring with ball 15.
10
2
Assembly in reverse order.
Installing the folding handle
Insert locknut 4 with spring 3 into the sprocket guard.
Press the carrier with folding handle 1 into the
sprocket guard, making sure it engages with
15
locknut 4.
13
Insert plastic ring 2 into the sprocket guard.
12
11
1
7
Repair Manual PS-35