Assembly; Shield Installation; Nylon Line Head Installation - Echo SRM-225 Operator's Manual

Hide thumbs Also See for SRM-225:

Table of Contents

ASSEMBLY

(Nylon line operation)

Parts Required:

Shield with cutoff knife is for use

with the Nylon Line Head only.

Install shield without cutoff knife

when using plastic or metal

blades, or serious injury may

result.

Place the shield on the bottom of

the bearing housing flange.

Place shield plate (B) on shield,

align holes. Install three (3) screws

from bottom through plate and

shield into gear case.

Assemble adapter plate (C) onto

PTO shaft.

Parts Required:

Wear Gloves or personal injury may result:

Cutoff knife is sharp.

◆

Gearcase and surrounding area may be hot.

◆

Debris Shield, Shield Plate,

three (3) 5 x 16 mm screws.

Nylon Line Head.

SRM-225

X7722279402

Table of Contents

Show Quick Links

Table of Contents