Table of Contents
Advertisement
Remote Start Features
Key Takeover
When you are ready to drive
The system keeps the engine running until the vehicle is ready to be
driven. To perform Key Takeover:
Disarm the system and enter the vehicle, do not step on the foot
1.
brake.
2.
Insert the key, turn it to the run position, and then step on the foot
brake, the remote start then turns off.
3.
The parking lights turn off to indicate remote start is off, and
then after a few seconds the remote plays the Remote Start OFF
message.
4.
The vehicle is ready to drive.
Note
Some Push-to-Start vehicles do not allow the key takeover
feature, check with your installer for more details.
Remote Start Safelock
Remote start safelock makes sure the doors are locked while the en-
gine is running and after, even if they are unlocked when remote start
is activated. Door locks may require additional parts and labor.
Disabling Remote Start
Remote start can be disabled by moving the Toggle Switch to the OFF
position. If remote start is attempted while off, the engine will not start
(see "Remote Start Faults" on page 33). Move the switch back to
the ON position to resume normal operation.
28
© 2016 Directed. All rights reserved.
Advertisement
Table of Contents
