Advanced Commands: (Level 1); Silent Arm; Runtime Reset - Viper 5806V Owner's Manual

Advanced Commands: (Level 1)

Press and release the
the following command buttons.

Silent Arm

Press and release
The alarm arms, doors lock (if connected), and the parking lights flash
once. The Arm LED turns on to confirm. Valet Mode* or Trigger Zone
Fault Report** messages may be received.
Silent Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the parking lights
flash twice. The Disarm LED turns on to confirm. The Silent Disarm
output may be replaced by the Alarm Report**

Runtime Reset

Press and release
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting. The confirma-
tion LEDs show the runtime and the Remote Start ON tones play to
confirm runtime reset.
Note Remote Start must be ON to use Runtime Reset.
12
AUX
button one time first, before pressing one of
AUX
AUX
AUX
AUX
AUX
AUX
© 2016 Directed. All rights reserved.