Download Print this page

Viper home 503V Quick Reference Manual

503v motion sensor with camera

Download this manual

503V Motion Sensor with Camera

Quick Reference Guide

Congratulations on the purchase of your Viper

Home Security Accessory. This guide walks you

through the process of adding this accessory to your

system and for mounting your accessory.

Note: Make sure you already have a Viper Home

Starter kit or Viper Home Hub installed. Please refer

to the quick reference guides found in these sys-

tems, or visit: www.viper.com/home/support.

Log into your Viper Home account at:

To pair the Camera to your system:

Click on the "Devices" tab

Click "Add New Device"

Click "Add Camera"

You are then prompted to insert the batteries

provided within three

minutes. First, remove

the mounting piece on

the back of the camera,

then remove the battery

cover and install the AA

batteries provided.

Once the batteries are

inserted the system

automatically connects

home.viper.com

Table of Contents

Page 1: Quick Reference Guide
Note: Make sure you already have a Viper Home Starter kit or Viper Home Hub installed. Please refer to the quick reference guides found in these sys- tems, or visit: www.viper.com/home/support.
Page 2: Mounting Instructions
and confirms the camera is paired with your system. After the camera is paired, you can give it a unique name (i.e. “Living Room”) In this screen, if you click the “More” button, you can set up additional options for the de- vice, such as “arm stay”, or “custom arm”, as well as select what action the camera performs when triggered.
Page 3: Additional Information
Additional Information Further information – For additional support, including additional information videos and installa- tion tips, visit: www.viper.com/home/support Warranty Information - Your system comes with a one year warranty. For complete warranty details visit: www.viper.com/home/support This device is intended for indoor use only and should not be mounted in any outside areas.