Removing/Attaching The Retard Roller - Canon image Formula DR-C130 User Manual

Removing/Attaching the Retard Roller

To remove or attach the retard roller, follow the procedure
below.
Use caution when removing or attaching the retard roller.
Using excessive force may cause damage or personal injury.
Removing the Retard Roller
1 Press the OPEN knob from both sides, and pull the front
unit out and downward to open it.
2 Grasp the ends of the roller cover inside the front unit and
pull it down to open it.
3 Remove the retard roller by moving it to the right to detach
it from its shaft, and pull it out.
Attaching the Retard Roller
1 Insert the retard roller into the slot inside the roller cover.
Align the notch on the roller with the shaft on the front unit, and
push the roller into the slot while keeping it to the left.
2 Close the roller cover. Make sure that the cover is
completely closed by pushing until you hear a click.