Optimise Standby; Check Filters - Miele G 6990 Operating Instructions Manual

Settings menu

Optimise standby

The dishwasher is supplied with the
function switched on as
timise standby
standard.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a sensor has been
pressed or after the end of a pro‐
gramme.
The dishwasher will not switch off in
the event of a fault.
Optimise standby can be switched off if
you prefer. If you do this, the duration
before the dishwasher switches off in‐
creases to 6 hours. Doing this will in‐
crease energy consumption.
 Select the setting you want and con‐
firm with OK.
96
Switching off the refill remind‐
ers
Op-
If you only ever use multi-function com‐
bination products containing salt and
rinse aid in your dishwasher, you can
switch the refill reminders for salt and
rinse aid off if you wish. Doing so will
not affect the DetergentAgent function
(see "Programme options - Detergent‐
Agent").
 Select the setting you want and con‐
firm with
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
switch the reminders back on.

Check filters

You can adjust the interval at which the
message to remind you to check the fil‐
ters appears.
You can set an interval of between 30
and 60 programme cycles.
The "Check filters" message is set at
the factory to appear after every 50 pro‐
gramme cycles.
 Select the interval you want and con‐
firm this with
.
OK
.
OK