Problem
All in-operation indica‐
tors are flashing quick‐
ly.
The warning buzzer is
sounding.
One of the following
faults appears in the
display:
Technical fault FXX
Waterproof fault
Technical fault F78
Possible cause and remedy
Before rectifying the problem, you must:
Switch the dishwasher off using the sensor.
There may be a technical fault.
After a few seconds:
Switch the dishwasher back on.
Select the programme you want.
Close the door.
If the fault message appears again, there is a techni‐
cal fault.
Call Miele.
The Waterproof system has reacted.
Turn off the tap.
Call Miele.
A fault has occurred in the circulation pump.
Switch the dishwasher off for at least 30 seconds
with the sensor.
Switch the dishwasher back on.
Select the programme you want.
Close the door.
If the fault message appears again, there is a techni‐
cal fault.
Call Miele.
Problem solving guide
71