Problem solving guide
Problem
All in-operation indica‐
tors are flashing quick‐
ly.
The warning buzzer is
sounding.
One of the following
faults appears in the
display:
Fault auto. door closing
Fault auto. door opening
72
Possible cause and remedy
Before rectifying the problem, you must:
Switch the dishwasher off with the sensor.
The door is sometimes obstructed by an item inside
the appliance.
If this is the case, remove the item and switch the
dishwasher on again.
If the same message appears again, call Miele.
There may be a technical fault.
Open the door manually.
If the same message appears again, call Miele.