Per Channel Settings - Crown DCi 8 600N Operation Manual

DriveCore Install Network Series Power Amplifiers

Per Channel Settings

Channel Attenuators
Each channel is supplied with a logrithmic 21-position detented input attenuator. Use a flat-blade screwdriver to set input level. Attenuation is from -95 dB
(full counter-clockwise) to 0 dB (full clockwise). For gain structure purposes, it is important to note that attenuators are at the end of the DSP signal chain.
Position
0
Typical
0
Attenuation
Position 11
Typical
-10
Attenuation
Operation Manual
1 2 3
-0.1 -1 -2
12 13 14
-13 -16 -20
4 5 6
-3 -4 -5
15 16 17
-30 -40 -50
7 8 9
-6 -7 -8
18 19 20
-60 Mute Mute
10
-9
page 49