Craftsman Sears 917.254460 Owner's Manual page 19

Lubrication
MA
TENANCE
G SPINDLE
O WHEEL BEARINGS
(_ BOTH ENDS OF
FOOT PEDAL SHAFT
_SAEMOTOR OIL
) ×TREME PRESSURE
LUBRICATING GREASE
SEARS PART NO 2557R
_,_j REFER ENGINE OIL SPECS
TO
(UNDER INITIAL PREPARATION
IN OWNERS MANUAL)
(_ CHASSIS GREASE
WITH BRUSH
REPAIR & ADJUSTMENT
FOR ANY ADJUSTMENTS, INSPECTION
OR MAINTENANCE:
I
PUSH TRACTOR CLUTCHIBRAKE PEDAL
COMPLETELY INTO BRAKE POSITION
2 MOVE GEAR SHIFT LEVER TO NEUTRAL
POSITION
3 PLACE PARKING BRAKE IN ENGAGED PO-
SITION REMOVE FOOT FROM PEDAL
4 PLACE ATTACHMENT CLUTCH SWITCH IN
DISENGAGED" POSITION
5 TURN IGNITION KEY TO OFF POSITION
6 MAKE ABSOLUTELY SURE THE BLADES
AND ALL MOVING PARTS HAVE COM-
PLETELY STOPPED
7 REMOVE THE IGNITION KEY
8 DISCONNECT THE SPARK PLUG WIRES
FROM THE SPARK PLUGS AND KEEP AWAY
FROM THE SPARK PLUGS TO PREVENT IN-
JURY FROM ACCIDENTAL STARTING, BE
CAREFUL TOO AVOID TOUCHtNG HOT EN-
GINE OR MUFFLER COMPONENTS
_OSITtvE
(RED CABLE)
TERMINAL
19
NEGATIVE
_BLACK CABLE}
TERMINAL
FIGURE 28