Disassembly and Assembly Instructions
11-2. Assembly Instructions
1
2
1) Solder SPK and MOT.
1) Check the LCD unit.
(dust or fingerprint)
1) Be careful not to break the LCD.
1) When soldering, pay attention to the polarity.
4
3
1) Attach the double-faced tape
1) Glue after soldering
2) Camera, MAIN FPCB connection.
1)Take care so that the glue may not fall outside PCB. 1) Insert the FPCB according to the guideline.
11-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization