Table of Contents
Advertisement
5
1) Attach the insulating tape
1) Attach the tape to cover all connector.
7
2. insert camera
1) Insert MAIN FPCB into UPPER slot.
2) Insert the camera.
1) Be careful not to tear the FPCB.
2) Be careful not to soil the Camera Lens with dust or
fingerprint.
1.Insert MAIN FPCB
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
6
1) Attach the lighting sheet.
2) Solder on the pad.
1) Attach the lighting sheet according to guideline.
8
1) Inser the SPK/MOT.
2) Attach the sponge.
1) When arranging the SPK/MOT WIRE, be careful not to
break the solder.
2) Be careful not to spill the sponge out of the
upper case.
11-7
guideline
Advertisement
Table of Contents
