Disassembly and Assembly Instructions
13
Decomposition hole
1) Separate the SPK and Motor
1) When removing the SPK and Motor, be careful not to
break the solder pad.
15
1) Remove the solder.
1) Be careful not to break the solder pad.
Decomposition hole
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
14
2
1) Lift up the camera.
2) Separate the LCD to No.2 direction.
1) Be careful not to tear the Camera FPCB.
2) When lifting up the CAMERA, be careful not to
break the camera sensor.
3) Be careful not to tear the MAIN FPCB.
16
1) Remove the insulating tape.
2) Lift up the actuator and remove the camera,
Main FPCB.
1) When removing the tape, be careful not to tear the
tape.
2) Be careful not to tear the FPCB.
11-4
1