Setting Up Polling Sending; Before You Can Be Polled To Send; Setting Up A Polling Box - Canon Laser Class 2050P User Manual

l-1100.book Page 6 Friday, December 13, 2002 5:07 PM

Setting Up Polling Sending

This section shows you how to set up your machine to store and hold a
document until it is polled by another machine to send it.

Before You Can Be Polled to Send

Before you set up your polling box, contact the parties who are going to
poll your machine to receive documents and confirm the following
points:
❏ If you are using an ITU-T password for the polling box, they must
❏ Your TX PASSWORD must match the ITU-T password attached when
❏ If the other party's machine does not support ITU-T subaddress/

Setting Up a Polling Box

Before you can use polling sending, you must create a polling box with
the POLLING BOX of the Menu System. The polling box holds the
document in the memory until the other party prompts (polls) your
machine to send the document.
1. Open the One-Touch Speed Dialing panel.
2. Press Data Registration.
9-6
Setting Up and Using Polling
HT1-2205-000-V.1.0 LSL User's Guide
also know this password. This password setting is optional.
the other party calls you. Confirm that the TX PASSWORD on your
machine matches the ITU-T password attached when the other party
calls you.
password transactions, do not set the password.
Data
Registration
R E G I S T R A T I O N
1 . D A T A R E G S T R A T I O N
Chapter 9