Table of Contents
Advertisement
Shown with Regular Low Profile Faceplate
Oversize Faceplate Dimensions: 44-1/8" W x 28-1/8" H
INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE
This Regency
product has been tested and listed by Intertek as a Vented Gas Fireplace Heater to the following standards: VENTED GAS
®
FIREPLACE HEATERS ANSI Z21.88-2014 • CSA 2.33-2014 and GAS-FIRED APPLIANCES FOR USE AT HIGH ALTITUDES CAN / CGA
2.17-M91.
This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home
Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada. See section
"Manufactured Mobile Home Additional Requirements" for additional requirements.
This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes
follow the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the
current CAN/CGA B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.
his Regency Mobile/Manufactured Home Listed appliance
T
comes factory equipped with a means to secure the unit.
26-1/4
(665mm)
22-5/16
(567mm)
3
40
4 "
(1034mm)
15
35
16 "
(913mm)
This Regency Mobile/Manufactured Home listed appliance comes
equipped with a dedicated #8 ground lug to which an 18 gauge
copper wire from the steel chassis ground must be attached.
U32-10 Regency
|
3
5
10
16 "
(262mm)
5
13
16 "
(33 mm)
0
|
Direct Vent Gas Insert
®
3
Hide quick links:
Advertisement
Table of Contents
