Telephone And External Devices; Voice Operations; Tone Or Pulse; Fax/Tel Mode - Brother MFC-J410 Basic User's Manual

6

Telephone and external devices

Voice operations

Tone or Pulse

If you have a Pulse dialling service, but need
to send tone signals (for example, for
telephone banking), follow the instructions
below:
a
Pick up the handset of the external
telephone.
b
Press # on the machine's control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will return to
the Pulse dialling service.

Fax/Tel mode

When the machine is in Fax/Tel mode, it will
use the F/T Ring (fast double-ring) to alert
you to pick up a voice call.
If you are at an external telephone, lift the
handset of the external telephone, and then
press Tel/R to answer.
If you are at an extension telephone, you'll
need to lift the handset during the F/T Ring
Time and then press # 5 1 between the fast
double-rings. If no one is on the line, or if
someone wants to send you a fax, send the
call back to the machine by pressing l 5 1.

Telephone services

6
Setting the Telephone Line
6
Type
If you are connecting the machine to a line
that features PBX or ISDN to send and
receive faxes, it is also necessary to change
the Telephone Line Type accordingly by
completing the following steps.
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose
Phone Line Set.
Press OK.
6
d
Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
e
Press Stop/Exit.
6
6
6
6
29