PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 209

Beverly Tourer 250 i.e.
Suspensions
- Fit the oil seal retaining circlip.
- Grease and fit a new dust guard.
- Fit the fork leg together with the stem on the fork
supporting clamp until it stops.
- Tighten the two screws to the prescribed torque
in the sequence indicated in the photograph.
Locking torques (N*m)
Stem support clamp tightening screws
20 ÷ 25
- Refill the fork leg with the recommended product
to the prescribed amount.
Recommended products
AGIP FORK 7.5 W Oil for front fork
Hydraulic fluid SAE 7.5 W
Characteristic
Oil quantity per stem
133 ± 3 cm³
SUSP - 209