PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 147

Beverly Tourer 250 i.e.
Studs
Check that the stud bolts have not worked loose
from their seat in the crankcase.
Check the depth of stud bolt driving with a gauge,
as indicated in the photograph. If it varies signifi-
cantly from the driving depth indicated, it means
that the stud bolt has yielded.
In this case, replace it.
By working on two fitted cylinder head fixing nuts,
nut and lock nut, as shown in the photograph, re-
move the stud bolt from its seat.
Clean the threaded seat on the carter thoroughly.
Refit a new stud bolt and apply the special product
on the threading crankcase side.
Tighten up to the depth of the driving indicated.
Recommended products
Loctite 'Quick Set' Strong 270 threadlock
Strong 270 threadlock
Lubrication
Engine
ENG - 147