Hotkey Beeper Control; Hotkey Summary Table - ATEN Master View Slideaway ACS-1208AL User Manual

ACS-1208AL / ACS-1216AL User Manual
Hotkey
The Beeper can be Hotkey toggled On and Off (see Activate Beeper, p.
Beeper 4-9). To toggle the Beeper, key in the following Hotkey combination:
Control
1. Invoke Hotkey Mode (see p. 3-1).
2. Press [B]
After you press B, the Beeper toggles On or Off. The Command Line
displays Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey Mode.
Hotkey
Summary
Table
3-6
[Num Lock] + [-] [Port ID] [Enter]
[T] [n] [Enter]
[A]
[←]
[→]
[↑]
[↓]
[B]
2003-01-27
Switches access to the computer that
corresponds to that Port ID.
Sets the Auto Scan interval to n
seconds - where n is a number from 1
- 255.
Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P]
or Left Click pauses Auto Scanning.
When Auto Scanning is paused,
pressing Any Key or another Left Click
resumes Auto Scanning.
Invokes Skip Mode and Skips from
the current port to the first accessible
port previous to it.
Invokes Skip Mode and Skips from
the current port to the next accessible
port.
Invokes Skip Mode and Skips from
the current port to the last accessible
port of the previous Station.
Invokes Skip Mode and Skips from
the current port to the first accessible
port of the next Station.
Toggles the Beeper On or Off.