ATEN Master View Slideaway ACS-1208AL User Manual page 44

ACS-1208AL / ACS-1216AL User Manual
4-12
F5 SKP:
Clicking the F5 field or pressing [F5] invokes Skip (SKP) Mode.
This function enables you to easily skip backward or forward -
switching the console focus from the currently active computer
port to the previous or next available one.
w The selection of computers to be available for Skip Mode
switching is made with the Scan/Skip Mode setting under the
F3 SET function (see p. 4-7).
w When you are in Skip Mode, press [ ← ] to switch to the
previous computer in the List; press [ → ] to switch to the next
computer in the List; press [ ↑ ] to switch to the last computer
on the previous station in the List; press [ ↓ ] to switch to the
first computer on the next station in the List.
Note: When you Skip, you only Skip to the the previous or
next available computer that is in the Scan/Skip Mode
selection (see p. 4-7).
w If a Port has been selected for Scan/Skip Mode, when the focus
switches to that port a Left/Right Triangle symbol appears
before its Port ID Display to indicate so.
w While Skip Mode is in effect, the console will not function
normally. You must exit Skip Mode in order to regain control
of the console.
w To exit Skip Mode, press [Spacebar] or [Esc].
2003-01-27