Table of Contents
Advertisement
ACS-1208AL / ACS-1216AL User Manual
ACS-1208AL / ACS1216AL Front View
1. Handle
2. Cover
3. Port LEDs
1-6
2
3
4
5
6
Pull to slide the KVM module out; push to slide the module in.
After sliding the KVM module out, flip up the cover to access the
LCD monitor, keyboard and touchpad.
Port LEDs provide status information about their corresponding
CPU Ports. The top row of LEDs corresponds to Ports 1 - 8; the
bottom row corresponds to Ports 9 - 16. There are two LEDs for
each Port. The one on the left is the On Line LED; the one on the
right is the Selected Port LED:
M An On Line LEDs light ORANGE to indicate that the
computer attached to the corresponding port is up and running.
M A Selected LEDs light GREEN to indicate that the computer
attached to the corresponding port is the one that has the KVM
focus. The LED is steady under normal conditions, but flashes
when its port is accessed under Auto Scan Mode (see F7
SCAN, p. 4-14).
2003-01-27
1
10
9
8
7
Advertisement
Table of Contents
