Myriad II Installation and Operation Manual
2
General Information on Myriad II (DB03051)
2.1 Appliance performance
Fuel type
Recommended heating area
Firebox volume
Maximum burn time
Maximum heat output (dry cordwood)
Overall heat output rate (min. to max.)
Average overall efficiency
Douglas Fir
Average overall efficiency
Optimum efficiency
Average particulate emissions rate
(8)
Average CO
[*]
Recommended heating area and maximum burn time may vary subject to location in home, chimney
draft, heat loss factors, climate, fuel type and other variables. The recommended heated area for a given
appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature
in the designated area in case of a power failure.
(1)
Values are as measured per test method, except for the recommended heating area, firebox volume,
maximum burn time and maximum heat output.
(2)
Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content
between 19% and 25%.
(3)
As measured per CSA B415.1-10 stack loss method.
(4)
Higher Heating Value of the fuel.
(5)
Lower Heating Value of the fuel.
(6)
Optimum overall efficiency at a specific burn rate (LHV).
(7)
This appliance is officially tested and certified by an independent agency.
(8)
Carbon monoxide.
(1)
[*]
[*]
(2)(3)
(3)
- EPA Cribs /
(3)
- Dry cordwood
(2)(6)
(7)
Dry cordwood
2
900 to 2,100 ft
(84 to 195 m
3
3
3.4 ft
(0.096 m
)
10 h
90,000 BTU/h (26.4 kW)
11,700 BTU/h to 26,400 BTU/h
(3.4 kW to 7.7 kW)
(4)
67.5% (HHV
)
(4)
To come% (HHV
75%
4.5 g/h (EPA / CSA B415.1-10)
165.6 g/h
2
)
(5)
72.9% (LHV
)
To come % (LHV
)
(5)
)
7