Communication By Irda - Citizen CMP-10 User Manual

4.3 Communication by IrDA

For IrDA communication, DIP switch setting needs to be set for IrDA.
Set the infrared port of the device to face straight to the printer's infrared
port.
Communication is available in the range of 15° up, down, left, and right.
Avoid blocking between the printer and the device to be connected.
Otherwise, data may not be sent correctly.
Max. length 80 cm
Left, Right, Top,
Bottom 15°
CAUTION!
• Communication in a place exposed to strong light such as direct sunlight and
fluorescent lighting may fail in receiving correct data.
• Communication may fail in receiving correct data after leaving the printer
unused for a long time in other than storage temperature.
• The range of communication may differ depending on the device used or the
environmental condition.
(Communication may be disabled even within the range given in the
specification.)
The IrDA beam
— 23 —