Status Screen - Sony PXW-X180 Manual

On-screen Indication
The following describes added/changed functions only.

Status screen

The following items have been added to the network status screen.
Network status screen
Displays the settings or status of the network.
Wired LAN Remote
CCM Name
NW Client Mode Status*
Number of Distribution
* Status of the network client mode is displayed as follows.
Indication Status
Off Not connected to CCM.
Connected Connected to CCM.
Connecting Connecting to (disconnecting
from) CCM.
Awaiting Awaiting CCM connection.
Address Error CCM address error.
Auth. Failed CCM user name/password error.
No Inet Access Internet connection error.
Cert. not Valid CCM certificate error.
Displays whether the remote operation is enabled or disabled for a connection via
LAN cable.
Name of CCM which the camcorder is connected to during the network client
mode.
Status of the network client mode.
The number of destinations for current streaming.
Description
Network client mode is off.
The camcorder is connected to CCM while the network client
mode is on, and the camcorder control from CCM is enabled.
The camcorder is connecting to (disconnecting from) CCM.
Wait until the connection (or disconnection) completes.
If "Connecting" remains on the LCD screen, the CCM
address you input may be incorrect. Check whether the
address setting is correct.
The network setting is disabled, though the network client
mode is on. To connect to CCM, enable the network setting.
Host name and IP address of CCM for the camcorder
connected may be incorrect. Check whether the setting is
correct.
User name or password to connect to CCM may be incorrect.
Check whether the setting is correct.
The camcorder cannot connect to the network. Check the
network connection or network settings.
The certificate for CCM is invalid. The date may be set to an
invalid value. Check the date setting.
GB
GB
7