Sony PXW-X180 Manual page 18

Notes
• This setting cannot be completed if any of the items in
the setting screen remain blank.
3
Set "Setting" of "Network Client
Mode" in the System menu to "On."
The network client mode is enabled and the
camcorder is connected with the PWS-
100RX1 network RX station.
Live streaming is started by operating the
PWS-100RX1 network RX station.
For details on the operation, refer to the
operating instructions of the PWS-100RX1
network RX station.
"Network Client Mode" can be assigned to
the assignable button. For details on how to
assign, refer to "Assignable buttons" in the
Operating Guide.
Notes
• Streaming, monitoring, proxy recording, and file
uploading cannot be performed when switched to the
network client mode.
• If switching to the network client mode during
monitoring, proxy recording, or file uploading, these
operations stop. You cannot switch the camcorder to
the network client mode during streaming.
Supporting Functions
when Connecting to the
Network via LAN Cable
(PXW-X180 only)
The following functions are enabled when the
camcorder is connected to the network via LAN
cable.
• Uploading original files/proxy files recorded on
the camcorder
• Using the Wi-Fi remote commander
• Operating the Web menu
• Remote operation or video monitoring
(streaming) with a device on which the
"Content Browser Mobile" application is
installed
Monitoring function of Content Browser Mobile
The video image may stop while monitoring due
to signal conditions when used or mobile devices.
GB
4
For details about the auto upload of the proxy
files and live streaming, refer to the "Firmware
update" for Ver. 2.0.
Setting
1
Connect the camcorder to the network
via LAN cable.
For details, refer to the "Connecting to the
Internet with a LAN cable" in "Firmware
update" for Ver. 2.0.
2
Set "Setting" of "Network " in the
System menu to "Wired LAN."
Notes
• To perform following, set "Wired LAN Remote" of
"Network" in the System menu to "On" (page 12):
– Uploading original files/proxy files recorded on the
camcorder
– Using the Wi-Fi remote commander
– Operating the Web menu
– Video monitoring by the "Content Browser Mobile"
application
• To prevent unauthorized access from the Internet, we
recommend setting "Wired LAN Remote" to "On"
when the network connection using LAN cable is not
connected to the Internet. When connecting to the
Internet, confirm whether the connecting destination is
a secure network.
• Original files recorded on the camcorder can be
uploaded in any format except AVCHD.