Sony PXW-X180 Manual page 19

USB Wireless LAN
Module "CBK-WA02"
(PXW-X180 only)
When you connect the camcorder to a smartphone
or tablet via wireless LAN, the USB wireless
LAN module "CBK-WA02" (sold separately) is
available, in addition to the supplied IFU-WLM3.
For details on wireless LAN connections, refer to
"Connecting to Other Device via Wireless LAN
(PXW-X180 only)" and "Connecting to the
Internet (PXW-X180 only)" in the "Firmware
update" for Ver. 2.0.
Attaching the CBK-WA02 to the
camcorder
1
Open the cover of the USB wireless
LAN module retracting part.
2
Attach the extension adapter for
network module supplied with the
CBK-WA02 to the camcorder.
Connect the convex terminal to the terminal
for the USB wireless LAN module on the
camcorder and connect the concave terminal
to the CBK-WA02. You can attach the
adapter to the screw hole (1/4 in.) of the
accessory shoe mount.
3
Attach the CBK-WA02 to the extension
adapter for network module.
Notes
• When you attach or remove the CBK-WA02 to
the camcorder, perform one of the following:
– Set both "Setting" in "Proxy Recording Mode"
of the Recording menu, and "Setting" in
"Network" of the System menu to "Off."
– Turn the camcorder off.
• When you attach a wireless LAN USB module or
3G/4G/LTE modem (sold separately) to the
camcorder via the extension adapter for network
module, the camcorder cannot receive a GPS
signal because the GPS antenna is blocked.
Wireless LAN channel
A part of the channel settings for wireless LAN
has been changed due to newly-supported "CBK-
WA02."
Adjust the settings in "Channel" of "Network" in
the System menu (page 12).
Notes
• "Auto(5GHz)" may not be displayed depending on the
wireless LAN module you use.
• When using the camcorder in a country/region which
prohibits using the frequency band of 5 GHz outside,
"Auto(5GHz)" is not displayed. Be sure that the
wireless LAN module is available in the country/
region you use beforehand. For details, refer to the
operating instruction of the wireless LAN module.
GB
GB
5