Mercedes-Benz COMAND Operator's Manual page 47

Audio
Radio operation
Tuning via scan search
Scan search is characterized as follows:
Scan search performs two runs.
During the first run, stations with ex-
tremely good reception are played.
During the second run, stations with
weaker reception are played.
Scan search plays each receivable sta-
tion for approx. 8 seconds.
Scan search can be ended manually.
Scan search automatically stops at the
station listened to before the scan
search was started.
46
Starting scan search
Switch to the desired waveband
( page 42).
Scan
Press the soft key.
Scanning begins.
Ending Scan search manually
Scan
Press the soft key again.
Manual tuning
Switch to the desired waveband
( page 42).
Press  or  for at least 2
seconds to scroll up or down.
Manual tuning is activated.
Keep the button pressed or release it
and keep tapping  or  in
quick succession.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.
Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.