Navigation Displays - Mercedes-Benz COMAND Operator's Manual

Navigation*
Route guidance
Switching navigation announcements
ON/OFF
Switching OFF:
During a navigation announcement,
press  for approx. 2 seconds.
For a short period of time, the message
Voice announcements muted
Further route guidance takes place
only via the symbols in the display.
If a new route guidance cycle is started,
the announcements are automatically
switched ON again.
Switching ON manually:
Press .
154

Navigation displays

The navigation displays are visible only
with activated route guidance.
To switch to the navigation display
from another display, e.g. from CD
mode, press  or .
is displayed.
Two display examples are shown below.
Display example 1:
The road currently travelled on is indicated
in the status bar at the bottom, in this ex-
I-80 E
ample (Interstate 80 East).
The information 1.2 mi on the very right in-
dicates the distance to the next driving ma-
neuver.
i
The display unit can be changed to km
or miles using the control system (see
your vehicle Operator's Manual).
When the display unit is set to miles,
the COMAND will indicate distances in
miles (mi) or feet (ft).
When the display unit is set to km, the
COMAND will indicate distances in kilo-
meters (km) and meters (m).