Mercedes-Benz COMAND Operator's Manual page 150

 
Press or to select the value you
wish to set.
Select the desired value using

or .
Keep repeating the last two steps until
you have set the required longitude and
latitude.

Press .
If the coordinates entered are located
in the digital map range, the display will
switch to map display with cursor. The
center point of the cursor indicates the
position of the coordinates entered on
the map.
i
To store the indicated position, press
 Memory
the soft key. For details on stor-
ing map locations ( page 150).
Navigation*
Destination entry
Press .
The Start Route Guidance menu
( page 152) appears if route guidance
has not yet been activated.

Press .
Route calculation begins.
If route guidance is already active, you
will be prompted to confirm that you
wish to use the coordinates set as the
new destination.
Yes

Press to select .

Press .
Route calculation begins.
149