Detour Function - Mercedes-Benz COMAND Operator's Manual

Detour function

The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route if possible.
Show the soft key displays
( page 158).
.
i
Detour
The soft key display indicates
whether the Detour function is active.
= not active.
= active.
Detour function is not active:
You can activate the function and set
the length of a route segment to be
blocked;
or
Detour function is already active:
You can change the length of the route
segment to be blocked ( page 162),
or switch OFF the Detour function by
deleting the detour ( page 162).
Activating detour function and setting
length of route segment to be blocked
If the soft key displays are shown
Detour
( page 158), press the
During route guidance
The system gives you a full-screen map
and freezes the map and screen show-
ing the position of the vehicle. You can
now set the distance of the route seg-
ment to be blocked.
Continue to press the
key until the desired route segment to
be blocked is reached.
The length of the route segment
blocked ahead appears in the status
bar. The section of the road that is
blocked appears as a red and white
dotted line on the map.
soft key.
Navigation*
More Less
or soft
161