Motorola r765 User Manual page 34

Talkgroups is preset as primary and up to
three other talkgroups as secondary.
If you turn on the Scan feature and your
handset is idle, it will monitor the activity of
the Talkgroups assigned to the Hub. If any of
the Talkgroups within that Hub of up to four
Talkgroups is active, the handset attempts to
join the call.
You can initiate a call on the primary Talkgroup
within the Hub. You may be able to respond to
any of the secondary Talkgroups within the
Hub (service provider dependent).
That is, the handset checks for all four
Talkgroups in every Group call request that it
receives from the system.
If the Group ID in the group call request
matches any of the four Talkgroups the
handset is monitoring, it responds with a
Group call response and attempts to join the
call.
26 calls
assign a knob position to a
Talkgroup or MOTOtalk
Note: First create a set as explained on page
29.
u
Find it: M >
> 2-Way Radio > Knob Position
1 Scroll to the knob position for assignment
and press r.
2 Choose an option from the following list
and press r:
option
Set as Talkgroup: Assign the knob position to
the Talkgroup name and ID.
Note: If you do not enter a Talkgroup name,
the Talkgroup number will be stored as a
name.