Table of Contents
Advertisement
channels and codes
Your handset has 10 channels and 15 codes.
Channels are divided into sets of frequencies
that allow you to make and receive MOTOtalk
calls. Other parties may also be talking on the
same channel.
Codes help minimize interference from
unwanted messages and other disturbances
when you are on the same channel as others.
To have a conversation, all parties must be on
the same channel and code. For Private
MOTOtalk calls, the person you are calling
must be in MOTOtalk and set to the same
channel to receive your call.
Handsets used in MOTOtalk mode should be
a minimum of 6 feet apart to maximize
performance and improve transmission range.
Note: When making a code call, all parties
that are on your code and channel can hear
your conversation.
talkgroup knob use
See "group calls, talkgroups, sets, and hubs"
on page 25.
enter MOTOtalk
1 From the main menu, scroll to MOTOtalk
and press r.
2 Select Go to MOTOtalk.
Switching to MOTOtalk Please Wait displays.
After a few seconds, the MOTOtalk idle
screen appears. MT Ready appears on the first
line of the display. The code you are set to
appears on the second line of the display. The
TM
MOTOtalk
93
Advertisement
Table of Contents
